1.)   Read entire label before using.

2.)   SHAKE WELL before using.

3.)   For new installations, Grout Colorant can be applied as soon as 48 hours after grouting.

4.)   Grout joints must be clean, dry and free of existing sealers or coatings.

5.)   Prepare existing grout joints

6.)   If more than 1 bottle of a single color is to be used, mix the material together in a large container to ensure uniformity of color.

7.)   If using Grout Colorant Applicator, pour Grout Colorant into Applicator bottle and apply a bead onto grout joint.

8.)   If using Grout Colorant Application Kit, pour Grout Colorant into a small dish and apply onto grout using the Applicator Brush or toothbrush.

9.)   Spread evenly using the Applicator Brush or toothbrush, working Grout Colorant into joint using a back-and-forth motion. Thin, even coats should be applied, limiting the amount of Grout Colorant that gets on the tile.

10.) If going from a dark to light grout color, more than 1 application may be necessary with a minimum 2-hour drying time between coats.

11.) After Grout Colorant has dried 1 or more hours (never more than 12 hours), lightly mist surface with water and let stand 5 minutes. Remove excess Grout Colorant from surface of tile using water and a white nylon scrub pad.

12.) Ready for surface traffic in 2 hours. Keep area dry for at least 24 hours. Avoid direct scrubbing on grout joints for 20 days to allow a full cure.

13.) Clean applicator tools with water after each use.
Color and Coverage Chart | Material Safety Data Sheet in Adobe Acrobat format.