Directions

Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry and free of waxes and coatings.

1. Using a plastic or wood spatula, stir thoroughly to mix the paste.
2. Apply a 1/4” thick layer of paste to the stain. Insure that the paste extends at least 1”-2” beyond the edge of the stain.
3. Do not cover.
4. Allow 48-72 hours for paste to completely dry to a powder.
5. Sweep up powder and discard.
6. Allow solvent to completely dry from the stone.
7. If stain is not completely gone after drying, repeat process.
8. Clean up residue and tools with mineral spirits.

Coverage

Approximately ˝-1 sq. ft. of surface at 1/4” thickness per pint.

Proper Care

To prevent future staining, reseal the area with BulletProof™ or Heavy Duty Stone Sealer.

For maintenance cleaning, use Revitalizer™ Stone and Tile Cleaner and Protector or All Purpose Stone and Tile Cleaner.

Warning

Combustible. Keep container closed and store in a cool location. May cause eye and skin irritation.